Sennheiser 2020 - Manual (Page 42)

40
Using the components
̈
Repeatedly press
̆
/
̄
until “ RESET ” appears in the
display.
̈
Press the SET button.
“ RST.OK ” flashes on the display.
̈
Press the SET button to load the factory-preset
default settings on the device.
“
DONE ” briefly appears on the display. The
bodypack transmitter / the wireless microphone is
reset to the following factory-preset default
settings:
y Channel: 1
y Line input: switched off (only bodypack
transmitter)
y Input sensitivity
– Line input: – 24 dB (only bodypack transmitter)
– Microphone input: –12 dB
y Lock mode: deactivated
y Infra-red service interface: deactivated
Activating/deactivating the lock mode
The lock mode prevents the bodypack transmitter /
the wireless microphone from being accidentally
programmed or switched off during operation.
To activate the lock mode:
̈
Press the SET button.
The operating menu appears. The first menu item
“
CHAN ” flashes.
̈
Repeatedly press
̆
/
̄
until “ LOCK ” appears in the
display.
PEAK
ON/OFF ON/OFF
SET SET
MUTE
LOW BATT
Wireless microphone Bodypack transmitter