SDI Technologies IHOME IP42 - Manual (Page 12)

Sound is distorted Volume level is set too high Decrease the volume
Sound source is distorted If the iPhone/iPod original sound source (MP3) is old or of poor quality,
distortion and noise are easily noticed with high-power speakers. Try
a different audio source such as a music CD through the line-in jack.
If you are using an external sound source like older generation of
iPod or iPod Shuffle, try reducing the output volume on the device
itself. Also try turning bass boost OFF.
10
Troubleshooting
Solution Symptom Possible Problem
Unit/adaptor gets
warm after extended
play at high volume This is normal Turn unit off for a while or lower volume
Lower EQ
settings. EQ settings are too high.
Custom snooze time not set
Alarm not working AM/PM time/alarm time not set correctly When setting clock or alarm time, take note of the AM/PM indicators
Alarm time or source selected for alarm 2
or alarm 3, not alarm 1, etc.
7-5-2 days setting is not correct 7 days is every day alarm, 5 days is Mon-Fri, and 2 days is Sat-Sun.
See page 5 for setting alarms.
Calendar is not set correctly, which can
affect 7/5/2 day alarm operation See page 4 for Time/Calendar setting section.
Make sure to set the alarm time and source for the alarm icon 1,
2 or 3 that is shown on the clock display
Snooze time
is too long/short
Press and hold Snooze button then turn Set Wheel to adjust
Time sync didn’t work Older iPod models such as iPod mini do not
support time sync function Make sure you are using an iPhone or newer iPod such as touch, nano
or classic. If not available, set time manually (see page 4).