SDI Technologies IHOME IP42 - Manual (Page 7)

5
Using the iP42 Alarms
Using the Alarms
iP42 has a dual alarm system so you can set two separate alarms to different alarm times, wake-to sources and frequencies
(daily, weekdays or weekend).
Setting the Alarms
1. Press and hold the or Button until the alarm time flashes on the lower part of the display. Turn the Set Wheel to
set the alarm time. Remember to set the correct AM or PM time.
2. Press the Alarm Button again to confirm the desired alarm time and then turn the Set Wheel to set the alarm frequency
(7 = the whole week, 5 = weekdays, 2 = weekends only).
3. Press the Alarm Button again to confirm alarm frequency then turn the Set Wheel to select an alarm source to wake to:
Buzzer, Playlist (user created), iPhone/iPod or Radio.
NOTE: to wake to playlist, you must first create a playlist named “iHome”. The iP42 will play music randomly from within
the “iHome” playlist.
If the selected alarm source is iPhone/iPod and no iPhone/iPod is docked/detected, the iP42 will default to a buzzer alarm.
4. For wake to radio, after selecting Radio as wake to source, press the Alarm Button again and turn the Set Wheel to
select a different radio station or press one of the preset buttons to wake to a preset radio station (see Using Radio on page
6 for details on setting radio stations and presets).
5. Press the Alarm button again (or no button within 10 seconds) to exit the alarm setting mode. The alarm will be armed
once set and the corresponding alarm icon will light up. The lower part of the display will show the earliest set alarm time.
Reviewing, Arming and Disarming Alarm (Turn Alarm Function On and Off)
1. Once an alarm is armed, the lower part of the display will show the alarm time and the alarm icon. If more then one alarm
is armed, the earliest alarm time will show along with both icons.
2. To review the alarm time, press an alarm button once. The related alarm time will show on the lower part of the display.
3. During alarm review, press the alarm button once to toggle it on or off. If the alarm is armed, the related alarm icon will light
up.
Resetting the Alarm to Come on the Next Day
When an alarm is sounding, press the Button to stop the alarm and reset it to come on the next set day. For example, if
an alarm is set for 5 days and you press the alarm reset on Friday, the alarm will come on again on Monday, not Saturday.
Snooze Operation
1. Press and hold the Snooze/Dimmer Button for a few seconds until the snooze time flashes. Turn the Set Wheel to set
the snooze timer from 1 to 29 minutes.
2. Press the Snooze/Dimmer Button after an alarm sounds. The alarm will be silenced for the set snooze duration time then
sound again. Snooze can be pressed several times during the 1 hour alarm cycle.