Sharp TINSE4377FCZZ - Manual (Page 30)

28
Loading paper in bypass tray
Place paper that is 7-1/4" x 10-1/2"
(A5) or smaller in the horizontal
orientation. Only the address side of envelopes
can be printed on. Place envelopes
with the address side face down.
Do not place heavy objects on the bypass tray or press down on the tray. The
bypass tray may be damaged, the machine may topple, and injury may result.
Special types of paper that cannot be loaded in other trays can be loaded
in the bypass tray.
For detailed information on the bypass tray, see "LOADING PAPER IN THE
BYPASS TRAY" in "Chapter 1 - BEFORE USING THE MACHINE" in the
Operation Guide.
When loading 8-1/2" x 11" size paper, pull out
the tray extension.
The maximum number of sheets that can be
loaded in the bypass tray is approximately
100 for plain paper and approximately 20 for
envelopes.
The side to be
copied on must
be face down!
Load the paper in the horizontal orientation.
Example: Loading an envelope
mxb401_us_qck.book 28 ページ ２００９年１月８日 木曜日 午後２時１分