Changing the size of a fax, Place the originals, Select settings in the touch panel – Sharp TINSE4377FCZZ User Manual
Page 77: 4) touch the [send size] key, This key is used to send a 2-sided original, The side to be scanned must be face up
75
CHANGING THE SIZE OF A FAX
The size of the original and the transmission size can be specified before
transmission.
This is convenient when faxing an original that is small and difficult to read.
The procedure for faxing both sides of an 8-1/2" x 11" original at 11" x 17"
size is explained below.
1
Place the originals.
When using the document glass,
place the original with the side to be
scanned face down.
2
Select settings in the touch
panel.
(1) Touch the [Original] key.
(2) Touch the [2-Sided
Booklet] key.
This key is used to send a 2-sided
original.
(3) Make sure that the size of
the placed original is
displayed.
If the wrong size appears, touch
the key and select the correct size.
(4) Touch the [Send Size] key.
The side to be scanned must be face up!
Auto
Auto
USB Mem. Scan
Fax
Scan
Standard
Auto Reception
Fax Memory:100%
Internet Fax
PC Scan
Scan:
Send:
File
Quick File
Address Review
Direct TX
Sub Address
Address Book
Special Modes
Resolution
Exposure
Original
Auto
8½x11
Scan Size
Send Size
100%
Fax/Original
OK
2-Sided
Booklet
2-Sided
Tablet
Image Orientation
8½x11
(1)
(4)
(3)
(2)
mxb401_us_qck.book 75 ページ ２００９年１月８日 木曜日 午後２時１分