Q & a – Samsung SIR-S4120R User Manual
Page 52
www.securitysamsung.com
AB68-00406A
Printed in Korea
9-3
DIGITAL VIDEO RECORDER
2
Q & A
Question
Answer
• Does recording continues after power cut
during recording.
• What would become of the system if dis-
connected with the input image signal dur-
ing recording?
• What shall I do to stop recording manually
while the system is detecting movements or
in recording mode as set by the alarm.
• When system is in Reservation Recording
state, how to stop the recording intentional-
ly?
• May I use an itentical IP Address for more
than 2 systems?
• What should I do if I have forgotten the
system's password or ID/password for
network access?
– Without power supply, the system can't perform
recording. But if the system was recording before
power cut, it will resume recording upon power sup-
ply.
– Without connection with the input image signal, the
system can't keep recording. But the system will
resume recording upon the supply of normal input
image signal.
– Press the STOP button ( ) for 3 seconds.
Then, recording will be paused for 5 seconds and
you shall enter the menu to change the recording
setup in the meantime. If you want to stop the alarm
recording, you shall set the ALARM SIGNAL
DETECTION of the ALARM RECORD SETUP
menu to OFF. If you want to stop the reserved
recording, you shall set the TIMER of the TIMER
RECORD SETUP menu to OFF. Without your
action against the system for 5 seconds, the system
will return to the previous mode.
– Yes, but as long as the 2 systems are not connected
to LAN simultaneously. Connecting the system to
LAN one by one is to be connected to the remote
monitoring program by PC. If you want to connect
the other system to LAN to be connected to the
remote monitoring system by PC, you shall discon-
nect the system currently connected to LAN from
the remote monitoring system by PC and connect
the system to LAN. Then resume connection in at
least one minute. Otherwise, you may not be con-
nected.
– Turn the hard drive rack's key to the OFF position
and enter the MENU. Then, change the password.