Attaching/detaching hdd – Samsung SIR-S4120R User Manual

Page 9

Advertising

1-10

1-9

DIGITAL VIDEO RECORDER

Attaching/Detaching HDD

Caution

Be sure to lock the hard drive rack in place for normal operation of the system. Unless
the hard drive rack is locked, the system cannot recognize your hard drive.
When removing the hard drive rack, be sure to wait until your hard drive's power LED
goes off. When replacing your hard drive with another one, be sure to turn off the sys-
tem's power. If you replace your hard drive with the power on, your hard drive may
malfunction or be damaged.
If you want to use a hard drive from another machine, be sure to format it from a PC
before using it. The system may not work normally if you use it without formatting it
first. Hard disk drives recommended for use with the DVR COMBO are Samsung
Spinpoint SV0802N and SEAGATE Barracuda 7200.7 80G.

Note

When installing a HDD into the hard drive rack, be sure to set the HDD as Master
mode. Otherwise, the system will not recognize the HDD. For instructions on how to
set the HDD as Master mode, please refer to the HDD's manual. For example, for a
Samsung Spinpoint V80 HDD, set the mode as follows:

H.D.D.

Lift up

5. Lift up the rack's front handle and push

the rack into the main unit. Once the

hard drive rack is fully inserted into the

main unit, lower the front handle to

secure it

6. Lock the hard drive rack with the

key, and then turn on the power.

Mounting HDD

2. Remove the hard drive rack from the

main unit by lifting up the handle on

the front of the rack and pulling

straight out.

3. Connect the removable rack's

data cable and power cord to

your hard drive.

POWER

ALARM

LAN

CHECK

REC

VCR

SEA

REC LOCK