Seagate BARRACUDA ST11950N/ND/W/WD - Manual (Page 26)

24 ST11950 and ST12550 Installation Guide, Rev. D
Refer to the appropriate section below for instructions in
terminating a drive.
Caution. Installing or removing terminator packs im-
properly can result in damage to the termina-
tors or surrounding components.
ST11950N and ST12550N drives
To terminate ST11950N and ST12550N drives, install
terminator packs as shown in Figure 6.
I/O Terminator Packs
(single-ended I/O only)
Pin 1 End
(of terminator)
Figure 6. Installing terminator packs (ST11950N shown)