Errors when sending and receiving a text message, Errors when sending a text message, Errors when receiving a text message – Siemens Gigaset C100 DECT User Manual
Page 39
38
SMS (Text Messages)
Gigaset C100 / englisch / A31008-C100-J101-1-7619 / SMS_Neutral_so.fm / 24.06.2003
Errors when sending and receiving a text message
Errors when sending a text message
The following error codes are displayed:
Errors when receiving a text message
You cannot receive text messages under the following conditions:
◆
The CLIP service (Calling Line Identification Presentation) is not activated for your
phone line,
◆
Call diversion is activated with All Calls (page 20),
◆
Call diversion All Calls is activated for the network mailbox ,
◆
The memory (incoming and draft message lists) is full. A message appears on the
screen if your phone cannot receive any more text messages for this reason.
Error Code
Description
E0
Calling Line Identification permanently withheld (CLIR).
Calling Line Identification not activated.
FE
Error occurred during message transfer.
FD
Connection to SMS centre failed.
Text messages cannot be sent or received if the number of the SMS cen-
tre is missing or incorrectly stored. Check that the fixed network
number of the SMS centre has been correctly stored.
i
Messages with special contents such as images/sound are not supported.