Radio listening to the radio (continued) – Sharp XL-HP505 User Manual

Page 22

Advertising
background image

22

XL-HP505

Radio

Listening to the radio (continued)

!

Memorizing a station

You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)

Note:
The backup function protects the memorized stations for a few
hours should there be a power failure or the AC power cord discon-
nection.

!

To recall a memorized station

!

To scan the preset stations

The stations saved in memory can be scanned automatically. (Pre-
set memory scan)

!

To erase entire preset memory

1

Perform steps 1 - 3 in "Tuning" on page 21.

2

Press the MEMORY/SET (MEMORY) button to enter the
preset tuning saving mode.

3

Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.

Store the stations in memory, in order, starting with preset
channel 1.

4

Within 30 seconds, press the MEMORY/SET (MEMORY)
button to store that station in memory.

If the "MEMORY" and preset number indicators go out before
the station is memorized, repeat the operation from step 2.

5

Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.

When a new station is stored in memory, the station previously
memorized will be erased.

Press the PRESET ( or ) button for less than 0.5 seconds to se-
lect the desired station.

1

Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.

2

Press the PRESET ( or ) button again when the desired sta-
tion is located.

1

Press the ON/STAND-BY button to enter the stand-by mode.

2

While pressing down the

button and the X-BASS/DEMO but-

ton, press the CLOCK/TIMER button until "TUNER CL" appears.

Advertising