Sharp XL-HP505 - Manual (Page 23)

23
XL-HP505
Ta
pe Play
back
Listening to a cassette tape
! Tape playback
Auto power on function:
When you press any of the following buttons, the unit turns on.
" TAPE button (main unit and remote control): The unit turns on
and the "TAPE" function is activated.
" TAPE button on the remote control: The unit turns on and side
A playback starts (regardless of the last function).
" / button on the main unit: The unit turns on and playback of
the last function starts (CD/TAPE/TUNER/VIDEO).
Before playback:
" For playback, use normal or low-noise tapes for the
best sound. (Metal or CrO tapes are not recom-
mended.)
" Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
" Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TAPE button.
3 Open the cassette door by push-
ing the area marked " PUSH
EJECT".
4 Load a cassette into the cas-
sette compartment with side A
facing you.
5 Press the button to choose one side or both
sides.
... To listen to both sides.
To play both sides ( ), start from side A. When playback starts
from side B, side A will not be played.
... For endless repeat play of both sides.
... To listen to one side.
6 Press the / ( ) button to listen to side A, or the but-
ton for side B.
Forward play Reverse play