Sharp XL-HP505 User Manual

Page 30

Advertising
background image

30

XL-HP505

Adv

anced F

eatures

Timer and sleep operation (continued)

!

Sleep operation

The radio, compact disc and cassette tape can all be turned off
automatically.

To confirm the remaining sleep time:

To cancel the sleep operation:
Press the ON/STAND-BY button while "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.

!

To use timer and sleep operation together

You can play back the same source only (the function cannot be
switched).

Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback will not be possible.

1

Play back the desired sound source.

2

Press the CLOCK/TIMER button.

3

Within 10 seconds, press the

or

button to select

"SLEEP", and press the MEMO-
RY/SET button.

4

Press the

or

button to select the time.

(Maximum: 3 hours - Minimum: 1 minute)

"

3 hours - 5 minutes 5-minute intervals

"

5 minutes - 1 minute 1-minute intervals

5

Press the MEMORY/SET but-
ton.

"SLEEP" will appear.

6

The unit will enter the power stand-by mode automatically
after the preset time has elapsed.

The volume will be turned down 1 minute before the sleep op-
eration finishes.

1

While "SLEEP" is indicated, press the CLOCK/TIMER button.

2

Within 10 seconds, press the

or

button to select "SLEEP

X : XX".
"X : XX" is sleep remaining time.

"

The remaining sleep time is displayed for about 10 seconds.

"

You can change the remaining sleep time while it is displayed by
pressing the MEMORY/SET button (steps 4 - 5).

1

Press the CLOCK/TIMER button.

2

Within 10 seconds, press the

or

button to select "SLEEP

OFF", and press the MEMORY/SET button.

1

Set the sleep time (see left, steps 1 - 5).

2

While the sleep timer is set, set the desired playback time
(steps 2 - 10, pages 27 - 28).

Sleep timer setting

Timer playback setting

Sleep operation will
automatically stop.

Timer playback
start time

1 minute - 3 hours

Advertising