SmartDisk MP3 - Manual (Page 7)

Powering FlashTrax
Your FlashTrax draws power either from the included AC Power Adapter or from its
custom lithium-ion battery pack. To load the battery onto your FlashTrax, slide it in
from the top of the unit until it clicks into place. If you later wish to remove the bat-
tery, push in on the two release buttons simultaneously and pull the battery out.
Note: Your FlashTrax contains a hard disk drive. Like all hard drives,
the drive in your FlashTrax is sensitive to vibrations and shock; avoid
dropping your FlashTrax or moving it violently, especially while it is
operating. Failure to respect these precautions may result in damage to
your FlashTrax or loss of data.
4
Volume
Play/Pause
Fast Forward
FT
Esc
FN
Power
Rewind
Zoom - /+
Navigation Arrows
Enter
Mode
Press to
remove
Push until battery clicks into place
Press to
remove