Sharp FO-1470 - Manual (Page 21)

Loading Printing Paper
19
1. Ins
tall
a
tion
Loading Printing Paper
The paper tray holds the paper on which received documents and
copies are printed. Up to 200 sheets of letter or legal size paper from
16 to 20 lbs. (60 to 75 g/m
2
) can be loaded in the tray. Less sheets can
be loaded when using heavier paper. The maximum allowed paper
weight is 24 lbs. (90 g/m
2
).
Note: When receiving or copying documents, do not allow more than
100 pages to collect in the received document outlet. Otherwise, the out-
let may become obstructed, causing paper jams.
Caution!
Do not use the blank side of paper that has already been printed on.
1
Remove the paper cover if it is on the
paper tray.
• If you are going to load legal size
paper, flip up the paper tray
extender.
2
Fan the paper, and then tap the edge
against a flat surface to even the
stack.
3
Pull the paper release plate toward
you and insert the stack of paper into
the tray, print side down.
• If paper remains in the tray, take it
out and combine it into a single
stack with the new paper before
adding the new paper.
all-ux510A.book Page 19 Thursday, September 14, 2000 9:05 AM