Sharp FO-1470 - Manual (Page 63)

Sending a Fax by Automatic Dialing
61
3. Sending D
o
c
u
ments
Speed Dialing
Speed Dialing can be used to dial any number that has been stored for
Automatic Dialing.
1
Load the document(s).
The display will show:
2
Press the SPEED DIAL key and then
enter the Speed Dial number by
pressing the numeric keys.
• To enter numbers 1 through 9, first
enter 0 and then the number.
(Example)
READY TO SEND
• Set the resolution and/or contrast if
desired.
3
Check the display. If the name or
number shown is correct, press the
START key. (If not, press the STOP
key and then repeat Step 2.)
RESOLUTION
SPEED
DIAL 0 9
START
all-ux510A.book Page 61 Thursday, September 14, 2000 9:05 AM