Sanyo XACTI VPC-CA100EX - Manual (Page 114)

89
English
Focus range setting
How to use the manual focus
1
Select -, and press the SET
button.
h The focus distance adjustment
bar appears.
2
Press [G] or [H] to adjust the
focus distance, and press the
SET button.
h The focus distance is set, and
you are returned to the
Recording Screen.
HINT
About the focus range
i The focus distance indication shows the distance between the center of
the lens and the subject.
i In some cases there may be a slight variance between the distance
(numerical figure) you set in the manual focus mode and the actual
distance.
About zoom movement when using the manual focus
i If the focus distance is set to 70 cm (27.56 in.) or less, the zoom changes
to the largest setting that is suitable for that focus distance.
i When the focus distance is set to 70 cm (27.56 in.) or less, the zoom will
function only within the range at which the image is focused.
About the super macro mode
i When the focus range is set to super macro +, the zoom is temporarily
set to the wide end.
i By assigning an operation shortcut to an arrow key (pages 122 and 125),
you can change the focus range setting from the Recording Screen.
7112 001:00:05 7112 001:00:05
2.0
m
Full-HD 14
M
-S