Sanyo XACTI VPC-CA100EX - Manual (Page 179)

APPENDIC
E
S
English
154
Shooting
An image is
not captured
when the
[
] button or
[ ] button is
pressed.
The power is
not turned on. If the power
save function
was activated,
turn on the
camera before
shooting.
If the camera
was turned off,
press the ON/
OFF button to
turn it on.
30, 31
The maximum
number of
images that
can be
captured or the
maximum
video clip
recording time
has been
reached. Install a new
card.
22
Delete the
images that are
not necessary.
76
The flash does
not operate. The flash off
mode is
selected. Set the flash to
automatic flash
mode or forced
flash mode.
42, 46,
63
The battery
pack is dead. Recharge the
battery pack, or
replace with a
fully charged
battery pack.
Or connect the
AC adaptor.
24
Problem Cause Action
Reference
page