Sanyo XACTI VPC-CA100EX - Manual (Page 178)

153
English
TROUBLESHOOTING
Before taking your camera to the repair shop, check the following table for a
possible solution to the problem.
Camera
Problem Cause Action
Reference
page
Power
No power. The battery
pack is dead. Recharge the
battery pack, or
replace with a
fully charged
battery pack.
Or connect the
AC adaptor.
24
The battery
pack has not
been inserted
correctly. Reinsert the
battery pack,
making sure to
orient it
correctly.
A blinking
temperature
warning icon is
\
shown,
and the
camera does
not turn on.
The battery
pack is too hot. Wait for the
battery pack to
cool down.
29
The camera
turns off by
itself. The power
save function
is operating. Turn on the
camera again.
31