Sanyo XACTI VPC-CA100EX - Manual (Page 118)

93
English
Exposure setting
The shutter speed and aperture size can be set individually.
1
Select the desired icon from the
exposure menu, and press the
SET button.
<If T, g or , was
selected>
1 Press [I] or [J] to select
aperture value or shutter
speed.
2 Press [G] or [H] to change
the setting for the selected
parameter.
2
Press the SET button.
h This completes the exposure setting.
HINT
i To prevent the effects of camera shake at slow shutter speeds, it is
recommended to use a tripod or other method to stabilize the camera.
i A slow shutter speed may be useful for photographing in a darker
environment, but noise in the image may be increased.
i To minimize noise in the image, complete the noise reduction setting
(page 122).
i The exposure setting automatically becomes @ if the scene select
function is active.
i In the sequential shots mode, the shutter speed is faster than 1/15 sec.
i Even if the shutter speed is set to slower than 1/29 sec., the shutter speed
during video clip recording is 1/30 sec.
i If the exposure setting is set to T, g or H, by assigning an operation
shortcut to an arrow key (pages 122 and 125), you can select the T, g
or H exposure setting from the Recording Screen.
F3.5
1/250
Shutter speed
Aperture