Samsung Digimax A7 - Manual (Page 35)

❾➓ 35 ❾➔
+/- button
❾✃ You can use the +/- button to adjust the values for the ISO, white balance and exposure
compensation.
Main menu Sub menu Available camera mode
-2.0 ~ 0.0 ~ +2.0(0.5EV steps) Exposure compensation
ISO
WHITE BALANCE
AUTO, DAYLIGHT, CLOUDY,
FLUORESCENT H, FLUORESCENT L,
TUNGSTEN, CUSTOM.
AUTO, 100, 200, 400
❾➴ Selecting an ISO Sensitivity
1. Press the +/- button, and then use the UP and DOWN
buttons to select the ISO icon( ). The ISO menu bar
will appear as shown.
2. Use the LEFT and RIGHT buttons to select the desired
ISO sensitivity value.
- AUTO : The camera's sensitivity is
automatically changed by variables
such as lighting value or subject brightness.
- 100, 200, 400 : You can increase the shutter speed while the same amount of light is
present, by increasing the ISO sensitivity. However, the image may be
saturated in high luminance. The higher the ISO value, the higher the
camera’s sensitivity to light is and therefore the greater its capacity to
take pictures in dark conditions. However, the noise level in the image
will increase as the ISO value increases, making the image appear
coarse.
3. When you press the +/- button again, the value you set will be saved and ISO setup mode
will end.
❾✃ ISO: You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.