Samsung Digimax A7 - Manual (Page 80)

❾➓ 80 ❾➔
Imprinting the recording date
❾✃ There is an option to include DATE/ TIME on still images.
❾➴ Date Imprinting
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [IMPRINT] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP and DOWN buttons to select the desired date
imprint type, and then press the OK button.
[DATE] : Only the DATE will be imprinted on the image file.
[D&TIME] : The DATE & TIME will be imprinted on the image file.
[OFF]
: The DATE & TIME will not be imprinted on the image file.
5. Press the menu button twice and the menu will disappear.
❾➴ The Date & Time are imprinted at the bottom right side of the still image.
❾➴ The date will be imprinted as a DATE TYPE setting.
❾➴ TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the
24 hour clock.
❾➴ The imprint function is applied only to still images.
INFORMATION
Function lamp
❾➴ Setting the function lamp
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LAMP] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [ON] is selected : The function lamp will light up.
If [OFF] is selected : The function lamp will not light up.
5. Press the menu button twice and the menu will disappear.
SETUP
DATE&TIME
DATE TYPE
IMPRINT
BACK: SET:OK
DATE
D&TIME
OFF
3072
SETUP
DATE TYPE
IMPRINT
LAMP
BACK: SET:OK
ON
OFF
3072
❾✃ You can turn on and off the function lamp located on the front of the camera.