Samsung Digimax A7 - Manual (Page 81)

❾➓ 81 ❾➔
❾✃ If you set the operation sound to ON, various sounds will be activated for camera startup,
when button are pressed, and if there is a card error, so that you can be aware of the camera
operation status.
❾➴ Setting Operation Sounds
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[SOUND] sub menu : OFF/ LOW/ MEDIUM/ HIGH
5. Press the menu button twice and the menu will disappear.
Sound
❾➴ Description of the Function lamp
Function Description
During power-on
After an image is captured
During voice recording
While recording a movie clip
Function lamp
When the self-timer is
activated Even if the function lamp is set to OFF, the self-timer lamp will work.
(See page 33.)
Function lamp blinks and then turns off when the camera is ready to
take a picture
Function lamp will blink once.
Function lamp will blink at a 1-second interval.
Function lamp will blink at a 1-second interval.
SETUP
IMPRINT
LAMP
SOUND
BACK: SET:OK
OFF
LOW
MEDIUM
3072