Sony CDX-C910RDS - Manual (Page 14)

14
Actual total number: Sony CDX-C910RDS ( E ,F,G) 3-856-717-11(2)
EN
2
Press (LIST) repeatedly until the desired
programme type appears.
The programme types appear in the order
shown in the above table. Note that you
cannot select “NONE” (Not specified) for
searching.
3
Press either side of (SEEK/AMS).
The unit starts searching for a station
broadcasting the selected programme type.
When the unit finds the programme, the
programme type appears again for five
seconds.
“NO” and the programme type flash for
five seconds if the unit cannot find the
programme type. It then returns to the
previous station.
Setting the clock
automatically
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1
Press (SHIFT), then press (2) (SET UP)
repeatedly until “CT” appears.
2
Press (4) (n) repeatedly until “CT on”
appears.
The clock is set.
3
Press (SHIFT) to return to the normal
display.
To cancel the CT function
Select “CT off” in step 2 above.
Notes
• The CT function may not work even though an RDS
station is being received.
• There might be a difference between the time set by the
CT function and the actual time.
Other Functions
Using the rotary remote
The rotary remote works by pressing buttons
and/or rotating controls.
You can control the optional equipment with
the rotary remote.
By pressing the button
(the SOURCE button)
Every time you press (SOURCE), the
source changes as follows:
FM1 n FM2 n MW n LW (SW) n CD1 n
CD2 n MD1 n MD2
Tip
You can turn on this unit by pressing (SOURCE) on the
rotary remote.
By rotating the control
(the SEEK/AMS control)
Rotate the control momentarily and
release it to:
•Locate a specific track on a disc. Rotate
and hold the control to locate the specific
point in a track, then release it to start
playback.
•Tune in the stations automatically. Rotate
and hold the control to tune in the specific
station.
(SOURCE)
PTY
SPORT SUR EQ
Set up
CT off SUR EQ
Set up
CT on SUR EQ