Sony CDX-C910RDS - Manual (Page 8)

8
Actual total number: Sony CDX-C910RDS ( E ,F,G) 3-856-717-11(2)
EN
Adding tracks to the programme
1
Press (SHIFT), then press (3) (P.MODE)
for two seconds.
To select Programme 2, press (4) (n)
repeatedly until “P 2” appears.
2
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
3
Press either side of (SEEK/AMS) to select
the track you want to insert.
4
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, “*Mem full*”
appears in the display, and you cannot insert tracks.
5
When you finish inserting tracks, press
(3) (P.MODE) for two seconds.
Erasing the tracks in the
programme
1
Press (SHIFT), then press (3) (P.MODE)
for two seconds.
To select Programme 2, press (4) (n)
repeatedly until “P 2” appears.
2
Press (1) (N) or (4) (n) to select the
track you want to erase.
The track currently registered in slot 6 of
Programme 1.
3
Press (5) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press (3)
(P.MODE) for two seconds.
Track slot number
CD PGM edit
2 P1.‚2 SUR EQ
TRACK
CD PGM edit
3 P1.‚6 SUR EQ
TRACK
DEL PGM edit
P1.‚6 SUR EQ
DISC TRACK