Adjusting the volume of the subwoofer(s), Adjusting the volume of the bass and treble – Sony CDX-C910RDS User Manual

Page 25

Advertising
background image

25

Actual total number:

Sony CDX-C910RDS (

E

,F,G) 3-856-717-11(2)

EN

Adjusting the volume of
the subwoofer(s)

1

Press (SOURCE) to select a source (radio,
CD or MD).

2

Press (SOUND) repeatedly until “SUB”
appears.

3

Rotate the dial to adjust the volume.
After three seconds, the display goes back
to the normal playback mode.

Adjusting the frequency of the
subwoofer(s)

To match the characteristics of the connected
subwoofer(s), you can cut the unwanted high
and middle frequency signals entering the
subwoofer(s). By setting the cut-off frequency
(see the diagram below), the subwoofer(s) will
output only low frequency signals so that you
can get a clearer sound image.

1

Press (SOURCE) to select a source (radio,
CD or MD).

2

Press (SOUND) for two seconds.

3

Press (SOUND) repeatedly until “SUB”
appears.

4

Rotate the dial to select the desired cut-
off frequency.
The cut-off frequency in the display
changes.

5

Press (SOUND) for two seconds.
When the frequency setting is complete, the
display goes back to the normal playback
mode.

Adjusting the volume of
the bass and treble

You can adjust the volume of the bass and
treble to best fit the acoustic characteristics
inside your car.

1

Press (SOURCE) to select a source (radio,
CD or MD).

2

Press (SOUND) repeatedly until “BAS” or
“TRE” appears.

3

Rotate the dial to adjust the volume.
After three seconds, the display goes back
to the normal playback mode.

Adjusting the turn-over frequency

You can adjust the bass and treble turn-over
frequencies.

1

Press (SOURCE) to select a source (radio,
CD or MD).

2

Press (SOUND) for two seconds.

3

Press (SOUND) repeatedly until “BAS” or
“TRE” appears.

Bass adjusting mode

Treble adjusting mode

4

Rotate the dial to select the turn-over
frequency.
The turn-over frequencies change as
follows:

Bass:
198 Hz
n 250 Hz n 314 Hz* n 396 Hz

Treble:
2.0 kHz
n 3.1 kHz* n 4.0 kHz n 5.0 kHz

*

Factory-set frequency

continue to next page n

DSP

Level

62

125

198

Frequency (Hz)

Cut-off frequency

SUB

C.off125Hz

SUR

EQ

Turn-over frequency

Frequency (Hz)

BAS

314 Hz

SUR

EQ

TRE

3.1kHz

SUR

EQ

Advertising