Sony 76c - Manual (Page 63)

Fine-tuning the Projector 63
■ Source
Displays the input source currently being projected.
■ Input Signal (computer, RGB video, and component video)
Displays the input signal setting.
■ Resolution (computer, RGB video, and component video)
Displays the input resolution.
■ Video Signal (composite and S-Video)
Displays the video signal format.
■ Refresh Rate (computer, RGB video, and component video)
Displays the refresh rate.
■ Sync Info (computer, RGB video, and component video)
Provides information that may be needed by the service
technician.
2. When you’re finished, press Esc or Menu .
Using the Projector’s Security Features
To prevent unauthorized use of the projector, you can do the
following:
■ Create an identifying user logo that is displayed at startup and/or
when the
A/V Mute button is pressed
■ Assign a password; this can be disabled for a set period if you want
to loan the projector to someone
■ Disable the projector’s buttons; this is useful, for example, if
you’re projecting in a classroom and you want to ensure that no
one touches the projector’s buttons while you’re using the remote
control
If you create a user’s logo for the projector, you can lock the logo on so
it is displayed as the startup screen and/or AV/Mute screen.
Unauthorized users cannot turn it off or change it. This feature is
intended to discourage theft and provides a way to identify the
projector should it be stolen.