Sony 76c - Manual (Page 88)

88 Solving Problems
You see vertical stripes or the image still looks blurry after
trying the solutions in the previous section.
■ If you’re projecting from a computer and displaying an image that
contains a lot of fine detail, you may notice one or more vertical
stripes or bands, or some of the characters may look heavy or
blurred. Press the
Auto button on the remote control. This resets
the projector’s tracking and sync settings.
■ If further adjustment is needed, you can fine-tune the Tracking
and Sync settings manually using the Signal menu as described
on page 57.
1. Fill the screen with an image containing fine detail when
making these adjustments. For example, in Windows you can
select a pattern to appear as your desktop background. Or try
projecting black text on a white background.
2. Adjust the Tracking to eliminate vertical stripes.
3. Adjust the Sync to increase the sharpness of the image.
The colors of the image are not right.
■ Try selecting a different Color Mode. See page 54 for
instructions.
■ If you’re displaying video, adjust the Color Saturation and Tint
settings on the Image menu. See page 54 for instructions.
■ Adjust the Brightness and Contrast settings on the Image
menu. See page 54.
■ Try adjusting the Color Adjustment setting on the Image menu.
See page 55.
■ Make sure the input signal setting on the Signal menu matches
the signal from the connected device. If the image is too purple
and you’ve connected a computer or RGB video device to the
Computer(Component Video) port, select Computer as the
input source. If you’ve connected a component video device,
select
Component Video . If you’re projecting from a composite
video or S-Video source, make sure the correct Video Signal is
selected on the Signal message. See page 56 for details.
note
Because of the different
technologies used, your
projected image may not
exactly match the colors on
your laptop or computer
monitor.