Sony 76c User Manual
Page 65
Fine-tuning the Projector
65
3. Use the
pointer button (or the down arrow button) and press
Enter
to select
User’s Logo
.
4. When you see a message asking if you want to use the present
image as a user’s logo, select
Yes
and press
Enter
. A selection box
displays over the image.
5. Use the
pointer button on the remote control or the arrow
buttons on the projector to select the area of the image you want
to use. Once you have selected the area, press
Enter
.
6. When you see the message
Select this image?
, choose
Yes
and
press
Enter
. If you want to change the area selected, select
No
,
press
Enter
and repeat steps 5 and 6.
7. When you see this screen, select a zoom rate (display size), and
then press
Enter
.
8. When you see the message
Save image as user’s logo?
, select
Yes
and press
Enter
. Saving the logo takes a few moments. Do
not use the projector or other sources (computer, video, etc.)
while the logo is being saved.
9. When you see the message
Completed
, press
Esc
.
10. To display the logo as the background screen when the A/V Mute
button is press, select the
Display
menu and press
Enter
.
11. Select
Background Color
and press
Enter
. Then select
Logo
and
press
Enter
.
12. When you’re finished, press
Menu
to exit the menus.
note
The default setting for the
Startup Screen
option in
the
Display
menu is
ON
. If
the
Startup Screen
is set to
OFF
, the logo will not
display at startup.
If the User’s Logo Protect
function has been set to
ON
,
the
Background Color
setting cannot be changed.
You need to turn the protect
function off first. See page 66
for details.
Once you’ve saved a user’s
logo, you cannot reset the logo
setting to its factory default
(no logo).