Scanport Ricoh SP 1200SF - Manual (Page 4)

2
To use the machine safely
Please keep these instructions for later reference and read them before attempting any maintenance.
Choosing a location
Place your machine on a flat, stable surface that is free of vibration and shocks. Put the machine near a telephone
wall jack and a standard, grounded AC power outlet. Choose a location where the temperature remains between
50
 F and 90.5 F (10 C and 32.5 C) and the humidity is between 20% to 80% (without condensation).Place your
machine on a flat, stable surface that is free of vibration. Put the machine near a telephone socket and a standard,
grounded electrical socket. Choose a location where the temperature remains between 10
 C and 32.5 C and the
humidity is between 20% to 80% (without condensation).
 Make sure cables leading to the machine do not constitute a trip hazard.
 Avoid placing your machine on the carpet.
 Do not place near heaters, air conditioners, water, chemicals or refrigerators.
 Do not expose the machine to direct sunlight, excessive heat, moisture or dust.
 Do not connect your machine to electrical sockets controlled by wall switches or automatic timers, or to the
same circuit as large appliances that might disrupt the power supply.
 Avoid sources of interference, such as speakers or the base units of cordless phones.
Safety precautions
Please read these instructions before attempting any maintenance, and keep them for later reference. When using
your telephone equipment, follow basic safety precautions to reduce the risk of fire, electric shock or personal
injury.
 DO NOT use this product near water, or in a damp environment.
 Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
 We DO NOT advise using an extension lead.
 Never install telephone wiring during a lightning storm. Never install a telephone wall socket in a wet location.
 If any cables become damaged, disconnect your machine, and contact your dealer.
 DO NOT place any objects on the machine, or obstruct the air vents.
 This product should be connected to an adjacent grounded AC power source within the range indicated on the
rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact a qualified
electrician.
 DO NOT dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal
instructions.