Sony RM-AV2500 - Manual (Page 14)

14
Notes on operating your
components
About the input select of a TV
The component code “8077” is the preset
code number for the input select of a
Sony TV. You can set this code number
for an infrequently used Component
Select button.
Follow the procedure on page 8 for the
input select setting.
“0” : TV tuner
“1” : VIDEO1
“2” : VIDEO2
“3” : VIDEO3
“4” : VIDEO4
“5” : VIDEO5
“6” : VIDEO6
“7” : HD1
“8” : HD2
“9” : HD3
This setting can be used for
programming the SYSTEM CONTROL
buttons (page 41).
Operating Your Components with
the Remote Commander
(continued)
To control the volume
Press the VOLUME +/– buttons to
control the volume, and the MUTING
button to mute. When you select a visual
component, the TV’s volume will be
controlled, and when you select an audio
component, the amplifier’s volume will
be controlled. You can change this setting
also (page 21).
Notes
• If you have programmed any signal for the
VOLUME or MUTING button for any
component using the learning function (page
15), that signal will be transmitted instead of
controlling the volume of the TV or amplifier
once you select that component.
• If you have programmed any signal for the
VOLUME or MUTING button of TV or AMP
using the learning function, that signal will
be transmitted only after you select TV or
AMP. When you select another components,
the preset volume control signals for TV or
AMP will be transmitted at that time.
• If you have assigned another component to
the TV or AMP button, the volume of the TV
or amplifier cannot be controlled even when
you select other components.