Sony RM-AV2500 - Manual (Page 63)

63
KEY DISPLAY
POWER
1 – 9, 0, ENTER
INPUT
DISPLAY
RECALL
FAVORITE
S.INDEX
GUIDE
EXIT
MENU
R
r
t
T
OK
CHANNEL +/–
m* 1
N* 1
M* 1
REC* 1 * 2
x* 1
X* 1
SAT
FUNCTION
To turn the power on/off
To change the channel
For example, to change to
channel 5, press 0 and 5 ( or,
press 5 and ENTER)
To switch the output of the
SAT receiver to the TV (When
you connect a TV cable or
anntenna to the receiver, the
output switches between a
TV and SAT program)
To turn on the display
To tune to the last tuned
station
To use the “FAVORITE”
function
To bring up the Station Index
To bring up Master Guide
To exit the mode
To call up the MENU display
To move the cursor upward
To move the cursor
downward
To move the cursor to the
right
To move the cursor to the left
To bring up the Station Index
when a program guide is not
displayed
To select the channel that is
highlighted
Channel up : +
Channel down : –
To rewind
To play
To fast-forward
To record
To stop
To pause
KEY DISPLAY
+10
ANT/SW
REPLAY
INFO
FUNCTION
Decimal point for channel
number
To switch the antenna input in
order
To replay the built-in DVR
To display program
information
* 1 The operation of the built-in DVR or the
video on demand
* 2 To avoid accidental recording, the REC key
does not work unless pressed for more than
1 second (factory setting). To change this
setting, see ”Adjusting the beam interval to
avoid key misoperation” on page 51.
Continued