Sony RM-AV2500 - Manual (Page 32)

32
Example: To program the input
select signal of your amplifier to
the CD button
1
Place the RM-AV2500 head to
head with your component’s
remote control.
2
While pressing COMMANDER
OFF, press CHANNEL + and
VOLUME +.
Learnable SYSTEM CONTROL keys
and number keys flash in the display
panel.
Note
The name of a Component Select button for
which a signal has already been learned
stays lit. If you want to program a new
signal for that button by learning, clear the
learned signal first (page 33).
RM-AV2500
Remote control of
your component
about 2 – 4 inches
(5 – 10 cm) away
MENU EXIT
SYSTEM CONTROL
MUTING
LIGHT COMMANDER OFF
RECALL
TV
AMP CD
CBL SAT
MD
DVR
TAPE
VCR
DVD
M1
M2
CHANNEL VOLUME
OK
A B C MORE
3
2
5
Adding a command that is
required when selecting a
component
In addition to the original function of
selecting the operating keys and buttons
of the desired component, the
Component Select button can have
another remote control signal by
“learning.”
For example, if you always have to
change input select of the amplifier to CD
when listening to the CD player, program
the signal of “changing the amplifier’s
input select” to the CD button of this
Commander. Then whenever you press
the CD button, it automatically works as
the original CD Component Select button
and changes also the amplifier input
select to CD. (In this case, the amplifier
should be turned on first.)
Note
Some specific remote control signals may not
be learned.
Adding an Extra Function to the
Component Select Buttons
(continued)