Samsung SIR-T165 - Manual (Page 28)

Memorizing Channels
Before you can use any of the special channel buttons (CH ▲▼, FAV-CH), the available
channels must first be scanned and memorized. This is an easy, automatic process that
typically takes two minutes. To memorize channels:
1 Press the MENU button on the remote control.
2 Use the Menu Up/Down buttons to
highlight the Channel icon and
press ENTER.
Use the Menu Up/Down buttons
to highlight the Memorize
Channel icon and press ENTER.
3
Use the Menu Up/Down buttons
to select Air or Cable (STD, HRC,
or IRC).
Use the Menu Up/Down buttons
to highlight the “Scan Start” icon
and press ENTER.
4
That’s it. The Set-Top Box will automatically scan and store all
of the digital (DTV) channels and analog channels that are
available in your local area.
5
Press EXIT when channel memorization is complete.
NOTES
The Set-Top Box MUST be connected to an antenna in order to receive digital TV signals.
Even if a particular channel is deleted from the memory, you can always tune to that channel directly
by using the number buttons on the remote control.
CHAPTER THREE
Operation
3 3
3.1
MD68-00278A(E)-CHAPTER 3 3/8/03 1:05 PM Page 1