Samsung SIR-T165 - Manual (Page 45)

4.11
CHAPTER FOUR
Special Features
4 4
Rating Control Menu
Access to channels and programs is controlled by a password (i.e., a 4-digit secret code
that is defined by the user).The on-screen menu will instruct you to assign a password (and
you can change it later, if necessary).
How to Change Your Password
1 Press the MENU button on the remote control.
2 Use the Menu Up/Down buttons to
highlight the Preference icon and
press ENTER.
Use the Menu Up/Down buttons to
highlight the Rating Control icon and
press ENTER.
3 Use the Menu Up/Down buttons to
highlight “Change” on the bottom
and press ENTER.
4 Use the number buttons (0 – 9) on
the remote control to enter your
current password.
5
Use the number buttons to enter a
new password.
Re-enter the new password to
confirm.
6
Your new password is now activated. Press EXIT.
NOTES
Password Error
•
If you forget the password, re-do steps 1~3.
At step 4, when the display asks you to enter the current password, press the master buttons
(INFO, 1, 8, and 2). Enter a new password and proceed with steps 5~6.
• The master buttons are available only in the Rating Control menu and cannot be operated during
normal viewing. (If the display asks you to enter the password while blocked, the master buttons cannot
be operated.)
• The Rating Control feature doesn’t operate with D-VHS recordings.
• The factory default password is ‘0000’.
MD68-00278A(E)-CHAPTER 4 3/8/03 1:12 PM Page 11