Sennheiser LV308 - Manual (Page 14)

14
Using the receiver
Starting the setup menu
In order to get into the configuration menu, the receiver must be
switched off.
̈ Open the battery compartment.
̈ Press the SET button
ᕧ
and keep it pressed.
̈ At the same time, turn the volume control
³
clockwise until it
clicks to switch the receiver on. The “SETUP” display appears on
the display panel.
Function of the buttons in the setup menu
³
Buttons Mode To ...
SET
Start display
get from the start display “SETUP“ to
the operating menu of the setup
menu
Operating menu
get into the setting mode of the
selected menu
Setting mode
store the settings and return to the
top menu level
̆ / ̄
Start display without function
Operating menu
change to the previous menu (
̆
) or
change to the next menu (
̄
)
Setting mode
adjust the setting of the selected
menu: option (
̆
/
̄
)
ESC
Start display without function
Operating menu
cancel the adjustment and return to
the start display “SETUP“
Setting mode
cancel the entry and return to the
start display “SETUP“