Sennheiser LV308 - Manual (Page 15)

15
Using the receiver
Getting into the operating menu of the setup menu
̈ Press the SET button
¶
to get from the start display into the
operating menu. The first menu “ LOCK ” flashes on the display.
Selecting a menu
̈ Press the ̆ / ̄ rocker button (UP/DOWN) to select the menu you
would like to adjust the setting.
The current setting that can be adjusted flashes on the display.
The setup menu comprises six menus that can be chosen in the fol-
lowing order:
Getting into the setting mode of a menu
̈ Press the SET
¶
button to get into the setting mode of the
selected menu.
The current setting that can be adjusted flashes on the display.
º
Display Function of the menu
LOCK Activating/deactivating the lock mode (see page 20)
TUNE
Setting a receiving frequency for the channe ls (see page 20)
and locking channles for the user (see page 20)
SQELCH Adjusting the squelch threshold (see page 21)
LTD
Acitvating/deactivating the limiter at the headphone
output (see page 22)
SW-REV
Displaying the revision of the firmware* (see see “SW-
REV” on page 22)
*software stored on a chip in the device
COPY
Setting several receivers to the same channel and receiver
settings simultaneously (see “COPY” on page 22)