Sennheiser LV308 - Manual (Page 42)

42
The operating menu of the transmitters evolution wireless series G 2
Working with the operating menu
By way of example of the “ TUNE ” menu, this section describes how
to use the operating menu.
After switching the transmitter on, the standard display is shown
on the display panel.
Getting into the operating menu
̈ Press the SET button to get from the standard display into the
operating menu. The last selected menu flashes on the display.
Selecting a menu
̈ Press the ̆ / ̄ buttons to select the menu you would like to
adjust the setting.
̈ Press the SET button to get into the setting mode of the selected
menu. The current setting that can be adjusted flashes on the
display.
Adjusting a setting
̈ Press the ̆ / ̄ buttons to adjust the setting.
̈ By briefly pressing the ̆ / ̄ buttons, the display jumps either
forwards or backwards to the next setting. In the “ CHAN ”,
“ TUNE ” and “ NAME ” menu, the ̆ / ̄ buttons feature a “fast
search” function. If you hold down a button, the display cycles
continuously, allowing you to get fast and easily to your desired
setting.
Storing a setting
̈ Press the SET button to store the setting. “STORED” appears on
the display, indicating that the setting has been stored. The dis-
play then returns to the top menu level.
̈ With most menus, new settings become effective immediately
without having to be stored. An exception are the “
BANK ”,
“ CHAN ”, “ TUNE ” and “ RESET ” menus. With these menus, new
settings only become effective after they have been stored
(“STORED” appears on the display, indicating that the setting
has been stored).
Exiting the operating menu
̈ Select the “ EXIT ” menu to exit the operating menu and to return
to the standard display.
̈ When in the operating menu, briefly pressing the ON / OFF button
will cancel your entry (ESC function) and return you to the stand-
ard display with the last stored settings.