Samsung Digimax U-CA 3 - Manual (Page 13)

13
Identification of features
Still image mode
There are two ways in which to provide the camera with power. You can use batteries or
alternatively, you can use an AC(100 ~ 250V) Adapter (DC 3.3V 2.0A).
We recommend using batteries for a digital camera.
(use batteries that are within a year of their date of manufacture) The batteries are listed below.
Non rechargeable batteries : Duracell CP-1 battery
Rechargeable batteries : Digimax power pack (SLB-1037)
Battery pack : Digimax Battery Pack (SBP-3603)
Lamp
Connecting to a Power Source
You can select from Auto, Manual, or Night mode. In Myset
mode, any changes made to settings other than Self-Timer and
Voice Recording will be maintained even after the camera is
turned off.
Type Operation Lamp Camera Status Lamp LCD Monitor
When turning on the power
7 color lights blink and then turns off when
the camera is ready to take a picture
Blinks orange once X
When the camera is in focus (when the
SHUTTER button is pressed halfway)
X Green lamp lights up
Autofocus mark
lights up green
When the camera is out of focus (when the
SHUTTER button is pressed halfway)
X Green lamp blinks
Autofocus mark
lights up red
While the flash is charging X Red lamp blinks X
While saving an image X Green lamp blinks X
While shooting a video Purple lamp blinks at a 1-second interval X Auto focus frame : White
During voice recording Blue lamp blinks at a 1-second interval X X
While the camera is connected to a PC X Green lamp lights up X
While transferring data between the camera and a PC X Green lamp blinks X
When shooting an image Green lamp blinks once for 0.3 second X X
Flash is ready (when the SHUTTER
button is pressed halfway)
X Orange lamp lights up X
While the self-timer is running
Red lamp blinks for 7 seconds at a 1-second interval/blinks
for 3 seconds at a 0.25 second interval
X X
When the LCD monitor is
turned off in Still Image mode
Green lamp lights up X X