Samsung Digimax U-CA 3 - Manual (Page 87)

87
Warning indicator
There are several warnings that may appear on the LCD display
Warning indicator Causes Remedy
- Turn off the camera power and turn it on again
- Insert the memory card again
- Format the memory card (p.66)
- Memory card error
- There is insufficient
memory capacity to take
an image
- There are no images
stored on the memory card
- A memory card is not
inserted
- The camera can t
recognize the memory
card
- File error
- Memory card error
- There is low battery capacity
- The memory card is
locked
CARD ERROR !
CARD FULL !
NO IMAGE !
NO CARD !
FILE ERROR !
LOW BATTERY !
CARD LOCKED !
- Insert a new memory card
- Delete unnecessary image files to free up
some memory
- Take images
- Insert a memory card that is holding
some images
- Insert a memory card
- Insert the memory card again
- Turn off the camera power and turn it on
again
- Format the memory card
- Contact a camera service center
- Insert fresh batteries
- Slide the write protect switch to the
bottom of the memory card.(p.16)
- When taking pictures in
dark places
LOW LIGHT !
- Use a tripod and take pictures in Flash
Photography mode.