Sub-Zero e Series - Manual (Page 15)

S TA N DA R D I N S TA L L AT I O N O P T I O N S
E S E R I E S B U I L T- I N D O U B L E O V E N
The Wolf E Series double oven may be
installed in combination with a Wolf warming
drawer with E Series stainless steel drawer
front or integrated drawer front. Refer to the
illustration below, and pages 10–13 for installa-
tion specifications for E Series double ovens.
727 mm
WARMING DRAWER
OPENING WIDTH
127
mm
102 mm
E
NOTE: Unless you are using cabinets deeper than 610 mm, it is recommended that the
electrical supply for the oven be placed in an adjacent cabinet. ANTI-TIP BLOCK APPLICATION PLATFORM APPLICATION
22 mm
PLATFORM
232 mm
606 mm min
22 mm 60 mm
51 mm x 51 mm
ANTI-TIP BLOCK
232 mm
606 mm min
838 mm
RECOMMENDED CABINET WIDTH
762 mm min
127
mm
E
724 mm
OVEN OPENING WIDTH
102
mm
E
E
ELECTRICAL LOCATION
WITHIN OPENING
APPLIES ONLY TO
CABINETS DEEPER
THAN 24" (610)
1260 mm 610 mm min 1260 mm 610 mm min
S T A N D A R D I N S T A L L A T I O N – M O D E L S I C B D O 3 0 - 2 F / S A N D I C B D O 3 0 - 2 U / S
Keep in mind that the size of the custom
panel for the warming drawer with integrated
drawer front will vary according to the
specific installation. Refer to the installation
instructions provided with the warming drawer
front for detailed specifications. Dimensions
will vary according to the specific installation.
Double oven installed above warming drawer with E Series stainless steel drawer front.
I N S TA L L AT I O N I N S T R U C T I O N S
15