Sub-Zero e Series - Manual (Page 6)

W O L F E S E R I E S B U I LT- I N OV E N S
E S E R I E S B U I LT- I N S I N G L E OV E N S
M O D E L S I C B S O 3 0 - 2 F / S A N D
I C B S O 3 0 - 2 U / S
IMPORTANT NOTE: A minimum 610 mm of
usable cabinet depth is required, or the back
panel of the cabinet may need to be removed
for proper installation. A minimum 635 mm of
usable cabinet depth is required for a flush
inset installation. The electrical box must be
flush with the back panel of the cabinet.
For ease of installation, Wolf recommends
using 838 mm wide cabinets with the E Series
single oven. A minimum 838 mm wide cabinet
is required for a flush inset installation. The
cabinet base platform must be able to support
113 kg.
Refer to the following illustrations for overall
dimensions, installation specifications and
electrical location for the E Series single oven.
The E Series single oven requires a separate,
grounded 3-wire 220-240 V AC, 50/60 Hz, 30
amp service with its own circuit breaker. Refer
to Electrical Requirements on page 16. The
oven is not supplied with an electrical plug.
IMPORTANT NOTE: Unless you are using
cabinets deeper than 610 mm for a standard
installation or 635 mm for a flush inset installa-
tion, it is recommended that the electrical
supply be placed in an adjacent cabinet.
Choose the location shown in the installation
illustrations on pages 8–9 that best suits your
installation.
603 mm
BEHIND FRAME
708 mm
718 mm
759 mm
603 mm
CONDUIT
CHANNEL
OPEN OVEN DOOR
TOP VIEW
559 mm
32 mm 25 mm
48 mm
48 mm
RIGHT SIDE VIEW
687 mm
759 mm
67 mm
O V E R A L L D I M E N S I O N S – M O D E L S I C B S O 3 0 - 2 F / S A N D I C B S O 3 0 - 2 U / S
Unframed Model ICBSO30-2U/S shown.
6