Samsung SV-262B - Manual (Page 10)

GB
19
Presetting the Stations Manually
☛
You do not need to preset the stations manually if you
have already set them automatically.
1 Press the MENU button on the remote control.
Result:
The programming menu is displayed.
2 Press the corresponding ➐ , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3 Press the OK button to select this option.
Result:
The INSTALLATION menu is displayed.
4 Press the corresponding ➐ or ❷ buttons, until the MANUAL SET
UP option is selected.
5 Press the ❿ button to select a MANUAL SET UP option.
Result: The TV STATION TABLE menu is displayed.
6 Press the ➐ or ❷ buttons to select a programme number as
required.
7 Press the ❿☎ button to preset the station.
Result: The MANUAL TUNING menu is displayed.
8 Press the ➛ or ❿ buttons to start scanning.
Result: The frequency band is scanned and the first station
found is displayed.
9 Press the ➐ or ❷ buttons until the NAME is selected.
The station name is set automatically from the broadcast signal.
10 To change the programme’s name, press the ❿☎ button.
Result: The first letter of the name flashes.
11 To... Then...
Select a character Press the ➐ or ❷ button until the
in the name required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the ❿ or ➛ buttons
previous character respectively.
12 If you... Then...
Wish to store the ◆ Press the corresponding ➐ or ❷☎ buttons,
station displayed until the MFT is selected.
◆ Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
◆ Press OK to store the station
Do not wish to ◆ Press the corresponding ➐ or ❷☎ buttons,
store the station until the CH is selected.
displayed ◆ Press the ➛ or ❿ buttons to go on
scanning the frequency band and display
the next station
◆ Go back to the beginning of Step 12
13 Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
14 On completion, press the MENU button three times to exit the
menu.
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
➐ ❷☎☎ ➛❿☎☎ OK END: MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
➐❷ ❿ END: MENU
** MANUAL TUNING **
PR : 1
CH : ---
MFT : -
NAME : ----
➐❷ ➛❿ MEMORY: OK
END: MENU
** TV STATION TABLE **
PR CH NAME
1 27 CAEB
2 -- ----
3 -- ----
4 -- ----
5 -- ----
➐❷ ❿ SWAPPING: OK
DELETE: CLR/RST MENU
GB
18
Presetting the Stations Automatically
AUTO SET UP
PLEASE WAIT
2 %
I--------------------I
END: MENU
YOUR DATA WILL BE LOST
PRESS OK TO CONTINUE
MENU TO EXIT
☛
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on
page 14).
Your VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆ Plug & Auto Set up (see page 14)
◆ Automatically
◆ Manually (see page 19)
You can store up to 80 stations.
1 Press the MENU button on the remote control.
Result:
The programming menu is displayed.
2 Press the corresponding ➐ , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3 Press the OK button to select this option.
Result:
The INSTALLATION menu is displayed.
4 Press the corresponding ➐ or ❷ buttons, until the AUTO SET
UP option is selected. And then press the ❿ button to select this
option.
Result:
A message appears, indicating that any channels
already preset on your VCR will be deleted.
5 Press OK to start the auto scanning.
Result:
◆ The PLEASE WAIT indication flashes on the
television screen.
◆ The first frequency band is scanned and the first
station found is displayed and stored.
◆ The VCR then searches for the second station and
so on.
◆ When the automatic scanning procedure has
finished, the VCR switches automatically to pro-
gramme 1.
➢
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
6 If you wish to cancel the auto scanning before the end, press the
MENU button three times to exit the menu.
➢
◆ The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually (see
page 16).
◆ Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 20).
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
➐ ❷☎☎ ➛❿☎☎ OK END: MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
➐❷ ❿ END: MENU