Samsung SV-262B - Manual (Page 11)

GB
21
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
1 Press the MENU button on the remote control.
2 Press the corresponding ➐ , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3 Press the OK button to select this option.
Result:
The INSTALLATION menu is displayed.
4 Press the ➐ or ❷ buttons to select MANUAL SET UP option.
And then press the ❿ button to select this option.
Result: The TV STATION TABLE menu is displayed.
5 Press the corresponding ➐ or ❷ buttons, until the required preset
TV programme is selected.
Result:
The selected station is displayed at the same time on
the television screen.
6 To change the programme number assigned to a station press the
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
7 Press the ➐ or ❷ buttons to select required position. And then
press OK again to swap the position.
8 You can modify this station by repeating the same procedure from
Step
5 onwards.
9 On completion, press the MENU button three times to exit the
menu.
Changing the Preset Station Table
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
➐ ❷☎☎ ➛❿☎☎ OK END: MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
➐❷ ❿ END: MENU
** TV STATION TABLE **
PR CH NAME
1 27 CAEB
2 -- ----
3 -- ----
4 -- ----
5 -- ----
➐❷ SWAPPING: OK
MENU
** TV STATION TABLE **
PR CH NAME
1 -- ----
2 -- ----
3 27 CAEB
4 -- ----
5 -- ----
➐❷ SWAPPING: OK
MENU
GB
20
If you have stored a TV station:
◆ That you do not require
◆ At the wrong programme position
you can cancel it.
1 Press the MENU button on the remote control.
2 Press the corresponding ➐ , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3 Press the OK button to select this option.
Result:
The INSTALLATION menu is displayed.
4 Press the corresponding ➐ or ❷ buttons, until the MANUAL SET
UP option is selected.
5 Press the ❿ button to select this option.
Result: The TV STATION TABLE menu is displayed.
6 Press the corresponding ➐ or ❷ buttons, until the required preset
TV station (PR) is selected.
7 Press the CLR/RST button.
8 Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9 On completion, press the MENU button three times to exit the
menu.
Clearing a Preset Station
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
➐ ❷☎☎ ➛❿☎☎ OK END: MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
➐❷ ❿ END: MENU
** TV STATION TABLE **
PR CH NAME
1 27 CAEB
2 -- ----
3 -- ----
4 -- ----
5 -- ----
➐❷ ❿ SWAPPING: OK
DELETE: CLR/RST MENU