Samsung SV-262B - Manual (Page 16)

GB
31
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1 During playback, press the MENU button on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding ➐ , ❷ or ➛ , ❿ buttons to select the
USER SET option.
3 Press the OK button to select this option.
Result:
The USER SET menu is displayed.
4 Press the corresponding ➐ or ❷ buttons, until the IPC option is
selected.
5 Press the ❿☎ button to select the IPC (intelligent picture control)
option.
➢
When intelligent picture control mode is ON , the sharpness
of the image is adjusted automatically.
6 To adjust the sharpness manually, select Intelligent Picture
Control mode
OFF .
7 Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
➢
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
8 On completion, press the MENU button again.
1 During playback, press the IPC button.
Result: The PICTURE menu is displayed.
2 Press the ❷ button to turn the IPC (Intelligent Picture Control)
option ON and OFF .
➢
When Intelligent Picture Control mode is ON , the sharpness
of the image is adjusted automatically.
3 To adjust the sharpness manually, press the ❷ button to turn the
IPC mode OFF .
◆ The horizontal picture adjusting appears.
4 Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
➢
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
5 On completion, press the IPC button again.
PTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
FORMAT 16:9 :AUTO
NICAM :ON
ECO. MODE :OFF
IPC :ON
➐❷ ❿ END: MENU
PTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
ECO. MODE :OFF
IPC :ON
➐❷ ❿ END: MENU
CLR/RST F.ADV INDEX
A.TRK IPC INPUT
REPEAT
TRK PROG
AUDIO DISPLAY
1
** PICTURE **
IPC : OFF
SOFTEN SHARPEN
-------- * -----
➛❿ ON/OFF: ❷
Intelligent Picture Control
★
(SV-661B/SV-662B/
SV-661I/SV-265B/ SV-261B/SV-262B/SV-261I Only)
★ (SV-665B/SV-661B/SV-662B/SV-661I)
★ (SV-265B/SV-261B/SV-262B/SV-261I)
GB
30
The Picture Adjustment feature allows you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the PROG/TRK (
➐ or ❷ ) / TRK ( or ) buttons
until the picture is clear and stable.
Result: ◆ The tracking bar appears.
◆ The image is adjusted.
◆ The tracking bar disappears when you release the button.
Adjusting Picture Alignment Manually
This function allows you to play back any pre-recorded cassette.
1 Switch on both the television and your VCR.
2 Insert the video cassette to be played. If the safety tab on the
cassette is intact, press ❿ ll.
Otherwise, the cassette is played automatically.
➢
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this VCR.
3 To... Then press...
Stop the playback ■ (STOP).
Eject the cassette (EJECT).
Playing a Cassette
Adjusting Picture Alignment Automatically ★ (SV-661B/
SV-662B/SV-661I/SV-265B/SV-261B/SV-262B/SV-261I Only)
The Picture Alignment feature enables you to optimize the tape
position automatically to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust picture
alignment by pressing the A.TRK button.
Result: ◆ The tracking bar appears.
◆ The picture is automatically adjusted.
◆ The tracking bar disappears when digital auto tracking has
been completed.
A.TRK IPC INPUT
REPEAT
TRK PROG
AUDIO DISPLAY
REC MENU
3 2
.TRK IPC
TRK PROG
IO
VCR INPUT
REPEAT
PROG/TRK
DISP./
★ (SV-665B)
★ (SV-661B/SV-662B/
SV-661I/SV-265B/
SV-261B/SV-262B/
SV-261I)