Samsung SV-262B - Manual (Page 19)

You can set repeat play to repeat the tape continuously from
beginning to end.
1 Press MENU on the remote control.
Result:
The programming menu is displayed.
2 Press the corresponding ➐ , ❷ or ➛ , ❿ buttons to select the
EASY OPERATION option.
3 Press the OK button to select this option.
Result:
The EASY OPERATION menu is displayed.
4 Press the corresponding ➐ or ❷ buttons, until the
REPEAT PLAY option is selected.
5 To... Press ➛ or ❿ , until...
Repeat play ON is displayed.
Do not wish to repeat play OFF is displayed.
6 On completion, press MENU twice to exit the menu.
You can set Interval Repeat Play so that the cassette is repeated a
number of times according to a specified set interval.
1 Press MENU on the remote control.
Result:
The programming menu is displayed.
2 Press the corresponding ➐ , ❷ or ➛ , ❿ buttons to select the
EASY OPERATION option.
3 Press the OK button to select this option.
Result:
The EASY OPERATION menu is displayed.
4 Press the corresponding ➐ or ❷ buttons, until the
NO. OF INTERVAL REPEAT option is selected.
5 To... Press ❿ , until...
Interval Repeat Play 5, 10, 15 is displayed.
(choose an interval repeat of
5, 10 or 15 times)
Cancel Interval Repeat Play OFF is displayed.
6 On completion, press MENU twice to exit the menu.
7 To select Interval Repeat Play during playback, press the
INPUT/REPEAT button at the desired start point.
Result:
“ INTERVAL REPEAT SETTING ” is displayed.
Press the INPUT/REPEAT button one more time at the desired
end point.
Result:
The tape is automatically rewound to the start point.
“
INTERVAL REPEAT ” is displayed.
GB
Interval Repeat Play
Auto Repeat Play
37
Searching for a Specific Sequence
Each time you record a cassette on this VCR, an “index” is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
➢
This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
INTRO SCAN
1 To search for a specific index, press INDEX.
2 Press the ➛➛ or ❿❿ buttons depending on the direction
where your desired programme is located.
3 When an Index mark is found the VCR will playback the tape for 5
seconds, after which it will continue searching for the next Index
mark.
4 If you want to watch the tape from a particular Index, simply press
❿ II.
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the INDEX button.
1 Press the INDEX to start the Index search.
2 Press the ➛➛ or ❿❿ buttons twice more. This will take
you directly to the start of the desired programme is located.
3 These Index searches can be made forwards: (press ❿❿ ) or
backwards: (press ➛➛ ).
4 To cancel an Index search simply press the ❿ II or ■ button.
GB
36
2 1 1 2
➞
V-LOCK
CLR/RST F.ADV INDEX
A.TRK IPC INPUT
REPEAT
1
INDEX: ➛➛☎☎☎☎☎❿❿
INDEX SEARCH: ❿❿☎☎☎☎ +01
etc.
Prev
Seq.
Seq. being
played
Next
Seq. etc.
VIDEOPLUS EXTEND :OFF
AUTO POWER OFF
:OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
➐❷ ❿ END: MENU
BONUS
★ (SV-665B/SV-265B)
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
➐❷ ❿ END: MENU
BONUS
★ (SV-661B/SV-662B/SV-661I/SV-261B/
SV-262B/SV-261I)
EASY OPERATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
➐ ❷☎☎ ➛❿☎☎ OK END: MENU
VIDEOPLUS EXTEND :OFF
AUTO POWER OFF
:OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
➐❷ ❿ END: MENU
BONUS
BONUS
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
➐❷ ❿ END: MENU
BONUS
★ (SV-665B/SV-265B)
★ (SV-661B/SV-662B/SV-661I/SV-261B/
SV-262B/SV-261I)