Soho NBG800 - Manual (Page 53)

SOHOware ® Secure Cable/DSL Router 45
Figure 57. IP Configuration
step3. Select the network adapter you use to connect to the BroadGuard.
Click Release
step4. Click Renew to retrieve new information (IP address, subnet mask, and
default gateway address) from the BroadGuard. Click OK to save the
changes and exit the program
step5. Go to DHCP IP Address Assignments (see Figure 44, page 35). Click
Refresh
Windows NT 4.0
step1. Click Start/Programs/Command Prompt
Figure 58. Command Prompt-1
step2. Type “ipconfig /release” (Figure 58) and press Enter
step3. Type “ipconfig /renew”, and press Enter to retrieve new information
(IP address, subnet mask, and default gateway address) from the
BroadGuard (Figure 59)