Siemens CF75 - Manual (Page 11)

Getting started 10
© Siemens AG 2004, E:\Auftrag
\Siemens\MobilePhones
\CF75 Ad
onis\en\LA\ADONIS_Startup.fm
Template:
X75, Version 2.
2; VAR Language: en; VAR issue date:
050524
left page (10) of CF75 Adonis FUG en, A31008-H6010-A1-1-7619 (14.06.2005, 14:53)
Charging the battery
Charging the battery
The battery is not fully charged
when delivered. Plug charger cable
into the bottom of the phone, plug
power supply unit into a mains pow-
er socket and charge for at least two
hours .
Y
Display during charging.
Charging time
An empty battery is fully charged after
about 2 hours. Charging is only possi-
ble within a temperature range of
+5 °C to 45 °C. If the temperature rises/
falls 5 °C above/below this, the charge
symbol flashes a warning. The mains
voltage specified on the power sup-
ply unit must not be exceeded.
Operating time
The operating time depends upon
the respective conditions of use. Ex-
treme temperatures considerably re-
duce the phone’s standby time.
Avoid placing the phone in the sun
or on a heater.
Call time: 100 to 330 minutes
Stand-by time: 60 to 275 hours
Charge icon not visible
If the battery has been discharged
fully, the charge icon is not immedi-
ately visible when the power supply
is plugged in. It will appear after up
to two hours. In this case the battery
is fully charged after 3 to 4 hours.
Only use the plug-in power supply
included in delivery!
Display while in service
Charge level display during opera-
tion (empty–full):
V W X
A beep sounds when the battery is
nearly empty. The charge level of the
battery is only displayed correctly af-
ter an uninterrupted charging/dis-
charging cycle. You should therefore
not remove the battery unnecessarily
and where possible not finish the
charging process prematurely.
Additional information
The power supply unit heats up when used
for long periods. This is normal and not
dangerous.
If the battery is removed for longer than
30 seconds, the clock must be reset.