Siemens CF75 - Manual (Page 84)

83 Setup
© Siemens AG 2004, E:\Auftrag
\Siemens\MobilePhones
\CF75 Adon
is\en\LA\ADONIS_CallSetup.fm
Template:
X75, Version 2.
2; VAR Language: en; VAR issue date:
050524
right page (83) of CF75 Adonis FUG en, A31008-H6010-A1-1-7619 (14.06.2005, 15:16)
Setup Call setup
C
¢
T
¢
Call setup
¢
Select function.
Hide ID b
When you make a call, your phone
number can be displayed on the re-
cipient's display (depending on the
service providers).
To suppress this display, you can en-
able the "Hide ID" mode for all subse-
quent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
Call waiting b
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Divert
You can specify the conditions under
which calls should be diverted to
your mailbox or other numbers.
Status check
You can check the current divert sta-
tus for all conditions. After a short
pause, the current situation is
transmitted by the network and
displayed.
Ö
Condition set.
Õ
Not set.
Ô
Display if status is un-
known (e.g. with a
new SIM card).
Clear all
b
All set diversions are cleared.
Set up call divert (example)
The most common condition for call
divert is, for example:
Unanswered
b
I
Select Unanswered (in-
cludes the conditions Not
reachable , No reply , Busy ,
see below).
C
Confirm.
Set Select.
C
Confirm.
Ï
/
J
Select or enter the phone
number to which the calls
are to be diverted.
§Mailbox§ Use existing mail-
box phonenumbers, or
enter them if necessary.
§OK§ Confirm. After a short
pause, the setting is con-
firmed by the network.