Siemens CF75 - Manual (Page 125)

Questions & Answers 124
© Siemens AG 2004, E:\Auftr
ag\Siemens\MobilePhones
\CF75
Adonis\en\LA\ADONIS_FAQ.fm
Template:
X75, Version 2.
2; VAR Language: en; VAR issue date:
050524
left page (124) of CF75 Adonis FUG en, A31008-H6010-A1-1-7619 (14.06.2005, 14:49)
Questions & Answers
If you have any questions about using your phone, visit us at www.siemens.com/
mobilephonescustomercare anytime. For additional help, we have listed below some
frequently asked questions and answers.
Configuration service
To help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet,
you can use a configuration service. This service is used to have the necessary settings for
your mobile phone sent to you by SMS. We recommend that you contact your network
provider who will send you the configuration messages.
As an alternative you can also use the "Setting Configurator" at www.siemens.com/
mobilephonescustomercare. Siemens will then send you the configuration messages.
Please follow the instructions contained in those messages.
Problem Possible causes Possible solution
Phone cannot be
switched on.
On/Off key not pressed long
enough.
Press On/Off key for at least two seconds.
Flat battery. Charge battery. Check charging indicator in
the display.
Battery contacts dirty. Clean contacts.
See also below under
“Charging error”
Too little standby
time.
Frequent use of organiser
and games.
Restrict use if necessary.
Fast search activated. Deactivate speed search(p. 95).
Display illumination on. Switch off display illumination (p. 79).
Unintentional keystrokes
(illumination!).
Activate key lock (p. 92).
Charging error
(charge icon not
displayed).
Battery totally discharged. 1) Plug in charger cable, battery is on charge.
2) Charge icon appears after approx. 2 hours.
3) Charge battery.
Temperature out of range:
+5 °C to +45 °C.
Make sure the ambient temperature is right, wait for
a while, then recharge.
Contact problem. Check power supply and connection to the phone.
Check battery contacts and telephone connection
socket, clean them if necessary, then insert battery
again.
No mains voltage. Use different mains power socket, check mains
voltage.
Wrong charger. Only use original Siemens accessories.
Battery faulty. Replace battery.