Siemens CF75 - Manual (Page 127)

Questions & Answers 126
© Siemens AG 2004, E:\Auftr
ag\Siemens\MobilePhones
\CF75
Adonis\en\LA\ADONIS_FAQ.fm
Template:
X75, Version 2.
2; VAR Language: en; VAR issue date:
050524
left page (126) of CF75 Adonis FUG en, A31008-H6010-A1-1-7619 (14.06.2005, 14:49)
No WAP access,
downloading not
possible.
Profile not activated, profile
settings wrong/incomplete.
Activate or set WAP profile (p. 72). If necessary ask
your service provider.
Text message
cannot be sent.
Service provider does not sup-
port this service.
Contact your service provider.
Phone number for service
centre not set or incorrectly set.
Set service centre (p. 47).
SIM card contract does not
support this service.
Contact your service provider.
Service centre too busy. Repeat message.
Recipient does not have a
compatible phone.
Check.
EMS pictures &
sounds are not dis-
played at the desti-
nation phone
Destination phone does not
support the EMS standard.
No Internet access
possible.
Incorrect WAP profile set, or
wrong or incomplete settings.
Check WAP settings; (p. 72) contact your service
provider if necessary.
PIN error/
PIN2 error.
Three wrong entries. Enter the PUK (MASTER PIN) supplied with the
SIM card according to the instructions. If the PUK
(MASTER PIN) has been lost, please contact your
service provider.
Phone code error. Three wrong entries. Contact Siemens Service (p. 127).
Service provider
Code error.
No authorisation for this service. Contact your service provider.
Too few/too many
menu entries.
Functions may have been add-
ed or deleted by the service pro-
vider via the SIM card.
Check with your service provider.
No fax possible. Wrong settings in the PC. Check settings (p. 90).
No authorisation for this service. Contact your service provider.
Charge meter does
not work.
Charge pulse is not transmitted. Contact your service provider.
Damage
Severe shock. Remove battery and SIM and re-insert them. Do not dismantle the phone!
Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat.
Dry connector contacts thoroughly. Stand mobile upright in an air current.
Do not dismantle the phone!
Problem Possible causes Possible solution
Reset all settings to factory default, p. 86: * # 9 9 9 9 #
A